TABLE OF CONTENTS



Estimated reading time: 1 minute, 18 seconds


Compatibility


Copper (Type M and L), PVC, Galvanized, PEX, PE pipe size: 0.75”, 1.0, 1.25”, 1.75”, 2.0”. 


Copper Type M0.75"1.0"1.25"1.75"2.0"
Copper Type L0.75"1.0"1.25"1.75"2.0"
Galvanized0.75"1.0"1.25"1.75"2.0"
PVC0.75"1.0"1.25"1.75"2.0"
PEX0.75"1.0"1.25"1.75"2.0"
PE0.75"1.0"1.25"1.75"2.0"


Looking for larger sizes? We offer sizes up to 4".  Click here to learn more.


 



Device Specifications


Accuracy: +\- 1.0% to 2.0% of flow reading (application, pipe size and type dependent).
Each unit is calibrated on a NIST traceable water flow standard with 4-point flow calibration.

Repeatability: +/- 0.2% of flow reading


Low-Flow Capability: 0.2gpm to 0.5gpm (application, pipe size and type dependent)

 

High Flow Capability: Maximum flow rate possible for each pipe size

 


Operating Specifications

 

Pipe Sizes:


0.75"1.0"1.25"1.5"2.0"


 Note: Larger size PVC up to 4″ available, Consult Factory Request Quote


Pipe Types: 


Copper Type LCopper Type MPVCGalvanized
PEXPE

 

Power: 110VAC, 10’ USB-C power cable (included). 5W rated power.



Physical Specifications:


Device Footprint: 4.0”

 

Outdoor Rating:  The bluebot device is IP67/NEMA6 rated by design and all internals have a conformal coating on the electronics which make them resistant to water and condensation. Outdoor use approved / water resistant.


Temperature Rating: The bluebot device operating temperature specifications are 32° F (0° C) to 122° F (50° C).


We recommend an insulated enclosure for operating in sub freezing temperatures or extreme heat.



 

Software Specifications


Hardware must be commissioned to the cloud and set up using the "bluebot water" iOS application. The device must be running iOS 14 or newer with Wi-Fi ON during setup for a successful device handoff and connection to our cloud.




If you have any questions or would like to speak to a member of the bluebot team, contact us directly at hello@bluebot.com or call/text (831) 275-2715 M-F 10 AM - 6 PM PST.